MODEL 721.21195000 721.21295000 20.21125 1.SAFETY PRECAUTIONS 20.21325 BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND OBSERVE EACH POINT CAREFULLY. 1. Change the paper bag in case the indicator 5. Attachments moves toward red. • Nozzle : for cleaning wooden floor, the room floor and carpet.
MODEL 721.21195000 721.21295000 20.21125 4.DISASSEMBLY 20.21325 NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power supply cord from the wall outlet. • Almost all the parts of this vacuum cleaner can be 4.2 Indicator Assembly Replacement...
Page 7
MODEL 721.21195000 721.21295000 20.21125 20.21325 4.4 P.W.B ASS’Y Replacement. 4.6 Cord reel assembly replacement 1) Lift the P.W.B ASS’Y in the direction of the arrow. 1) Lift the cord reel assembly from the body base in direction of the arrow.
Page 8
MODEL 721.21195000 721.21295000 20.21125 20.21325 4.7 Belt Changing and Brush Cleaning 4) Carefully insert and lift screwdriver at each brush support (ONLY MODEL 721.21295000, 20.21325) to free brush from base. • Disconnect cleaner from electrical outlet. Check and remove hair, string and lint build-up frequently in the Power-Mate®...
Page 9
MODEL 721.21195000 721.21295000 20.21125 20.21325 TO REPLACE BELT: 4) Line up tabs on cover with slots inside the base. 1) Install brush supports onto brush assembly. Cover Tab Base Slot 5) Push cover and base together. 2) Install new belt in belt groove on the brush assembly, than over the motor shaft.
MODEL 721.21195000 721.21295000 20.21125 5.TROUBLE SHOOTING 20.21325 1) SWITCH ON BUT MOTOR DOES NOT TURN CHECKING CAUSE SOLUTION Check the power source Poor plug insertion Insert again Power cord cut Repair or exchange Interior lead wire cut Exchange the lead wire...
Page 11
MODEL 721.21195000 721.21295000 20.21125 20.21325 3) SWITCH OFF BUT MOTOR TURNS Poor connection Repair Poor switch Exchange the switch 4) WEAK SUCTION POWER Exchange the carbon brush Carbon brush defaced or the motor Motor armature cut Exchange the motor Low rotation speed...
Page 12
MODEL 721.21195000 721.21295000 20.21125 20.21325 5) VIBRATION NOISES Loose parts Secure firmly Unbalanced motor assembly Exchange or repair the motor Foreign matters are attached Remove the foreign matters to the impeller Exchange the carbon brush Poor carbon brush rectification or the motor...
MODEL 721.21195000 721.21295000 20.21125 7.POWER AND CONTROL CIRCUIT BOARD 20.21325 7.1 MODEL 721.21195000, 20.21125 COMPONENT SIDE SOLDER SIDE - 15 -...
MODEL 721.21195000 721.21295000 20.21125 20.21325 REPLACEMENT PARTS LIST MODEL 721.21195000 20.21125 LOCATION NO. PART NO. DESCRIPTION REMARK 130401 3040FI1111D Base, Body 146601 4660FI1114D Wheel 135505 4660FI3238N Cover, Wheel 144801 3I23004B Locker, Filter 149704 4I23017A Spring 152301 5230FI3248A Filter, Motor Safety...