Sears 721.37060700 Manual page 11

4. DISASSEMBLY
3) Remove the 3 screws on the Housing Motor
and remove it.
4) Disconnect 2 lead wires and remove the
mount packing and seal packing.
2 leads
5) To reinstall the Motor reverse the steps above.
Mount Seal
packing packing
NOTE : Make sure that the mount packing
should be located in the correct position as
shown when assembling
12. PCB Assembly replacement
1) Lift the PCB Assembly up and disconnect 2
connectors.
2) To reinstall the PCB Assembly reverse the
steps above.
- 11 -
MODEL 721.37060700