Sears 721.37060700 Manual page 7

4. DISASSEMBLY
6) Press the left foot pedal and turn vacuum
cleaner over, push the latch on the Head to
the right and then the hose can be removed.
7) Remove the 4 screws on each side fastening
the Body and Head and then remove the 2
plate covers.
8) Remove the Head Assembly by removing the
three connectors as shown below.
9) To reinstall the Head Assembly reverse the
steps above.
2. Wheel Assembly replacement
1) Remove the C clip by using a straight
screwdriver and remove Wheel Assembly.
2) To reinstall the Wheel Assembly reverse the
steps above.
3. Lever Release replacement.
1) Remove the 1 screw and pull the shaft.
2) Lift lever from holder and release spring.
3) To reinstall the Lever Release reverse the
steps above.
- 7 -
MODEL 721.37060700
Shaft
Spring