Disassenbly - Sears 721.37060700 Manual

4. DISASSEMBLY
NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the
electrical power supply cord from the wall outlet.
Almost all of the parts of this vacuum cleaner
can be disassembled with a screw driver and
each connecting component easily fits together.
• Disassemble one by one referring to the
exploded view.
• If possible, do not disassemble except for the
necessary parts. It is not necessary to
disassemble the parts that are not detailed in
the exploded view.
1. Head Assembly Replacement
1) Remove the dust bin as shown below.
2) Raise the HEPA Filter cover.
3) Press the wand release
button on the carry
handle and tilt the wand
handle forward.
Lift the wand out and up.
4) Remove the hose as shown below.
5) Remove the hose through the body at the
location shown.
- 6 -
MODEL 721.37060700