Network Menu; Memory Menu - Oki 3037 User Manual

Only appears if the network card is installed.
Item
TCP/IP
NETWARE
ETHERTALK
NETBEUI
FRAME TYPE
DHCP/BOOTP
RARP
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
PRINT
SETTINGS
INITIALIZE
Item
RECEIVE BUFF
SIZE
RESOURCE
SAVE
FLASH
INITIALIZE

Network menu

The default settings are bold.
Value
Enable; Disable
Enable; Disable
Enable; Disable
Enable; Disable
Auto; 802.2; 802.3
Ether-II; Snap
Enable; Disable
Enable; Disable
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ON; OFF
ON; OFF

Memory menu

The default settings are bold.
Value
Auto; OFF; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB
AUTO; Off; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB
Execute
ES 3037/3037e Setting up • 72
Description
Selects TCP/IP protocol.
Selects Netware protocol.
Selects EtherTalk protocol.
Selects NetBEUI protocol.
Selects Ethernet frame type.
Selects whether selection of DHCP/
BOOP is automatic.
Selects whether selection of RARP is
automatic.
Configures IP address of 12
alphanumeric characters.
Configures subnet mask of 12
alphanumeric characters.
Configures gateway address of 12
alphanumeric characters.
Selects printing of network menu
map.
Selects network initialization.
Description
Sets the size of the receive buffer
and depends on the amount of
memory installed in the printer.
Set the size of the font cache area
and depends on the amount of
memory installed in the printer.
Initializes flash memory if installed.