Using Overlays; General Information - Oki 3037 User Manual

Using Overlays

Before overlays can be printed, they must be created in a software
application and saved as a print file, then downloaded to the printer's
internal hard disk drive or flash memory using Storage Device
Manager.

General Information

To use overlays, the Oki Storage Device Manager software must be
installed. It is recommended that the printer be equipped with the
hard disk drive (standard on all Oki dxn models).
You can save logos, letterheads, etc. as overlays
• on the printer's internal hard disk drive
Maximum available space
2 MB each for PCL Macros and PostScript Forms)
or
• in the printer's flash memory
Available space limited to about
0.5 MB each for PCL Macros and PostScript Forms
You can then add one (or any combination of overlays) to a file as it
is being printed.
ES 3037/3037e Software Utilities • 511