System Configuration Menu - Oki 3037 User Manual

Item
POWER SAVE
DELAY TIME
PERSONALITY
USB
PS-PROTOCOL
NETWORK
PS PROTOCOL
CLEARABLE
WARNING
AUTO
CONTINUE
MANUAL
TIMEOUT
WAIT TIMEOUT

System configuration menu

The default settings are bold.
Value
5 min; 15 min; 30 min;
60 min; 240 min
Auto emulation;
PCL; IBM PPR III XL;
Epson FX;
AdobePostScrip
ASCII
RAW
ASCII
RAW
ON
; Job
On; Off
60 sec; 30 sec; Off
Off; 5 sec to 300 sec;
default = 40 sec
ES 3037/3037e Setting up • 62
Description
Sets the time before printer enters
power save mode.
Selects the printer emulation
language. Note: the only printer
languages that can be selected are
those enabled in the Personality
section of the Maintenance menu.
Specifies PostScript (PS)
communication protocol mode of
data from USB. (In RAW mode,
Ctrl-T is invalid.)
Specifies PS communication
protocol mode of data from OkiLAN
6200e Plus.
(In RAW mode, Ctrl-T is invalid.)
PCL emulation: Sets the time
before deleting error messages. If
On, press Error Delete switch to
display error. If Job, error remains
displayed until next print job is
received.
PS emulation: Error messages are
only shown during job regardless of
setting.
Sets the printer to recover
automatically after a memory
overflow or print overrun.
Sets the time between requesting
that paper is inserted and when the
print job is cancelled should paper
not be inserted.
Only works in PostScript mode.
Sets the time between receiving the
last byte of data and the page being
automatically ejected.
Only works in PCL mode.
In PS mode the job will be
cancelled.