Parallel Menu; Usb Menu - Oki 3037 User Manual

Item
PARALLEL
BI-DIRECTION
ECP
ACK WIDTH
ACK/BUSY
TIMING
I-PRIME
OFFLINE
RECEIVE
Item
USB
SOFT RESET
OFFLINE
RECEIVE

Parallel menu

The defaults are bold.
Value
Enable; Disable
Enable; Disable
Enable; Disable
NARROW; MEDIUM;
WIDE)
ACK-in-Busy;
ACK-while-Busy
3 micro-sec; 50 micro-
sec; Disable
Enable; Disable

USB menu

The default settings are bold.
Value
Enable; Disable
Enable; Disable
Enable; Disable
ES 3037/3037e Setting up • 71
Description
Selects parallel (Centronics) interface.
Selects bi-directional communication.
Selects ECP mode.
Sets ACK width for compatible
reception:
Narrow = 0.5 µS
Medium = 1.0 µS
Wide = 3.0 µS
Sets output order for ACK and BUSY
during reception.
ACK IN BUSY: BUSY=LOW to the
end of the ACK pulse
ACK WHILE BUSY: BUSY=LOW to
the centre of the ACK pulse.
Sets or disables the i-Prime signal
When set to Enable, this function
maintains reception without changing
the interface signal, even though an
alarm occurs.
The interface stays open even if the
ON LINE button is pressed.
The interface issues a BUSY signal
only when the receive buffer is full or
when a service call occurs.
Description
Selects USB interface.
Selects use of soft reset command.
When set to Enable, this function
maintains reception without
changing the interface signal, even if
an alarm occurs. The interface stays
open even if the ON LINE button is
pressed. The interface issues a
BUSY signal only when the receive
buffer is full or when a service call
occurs.