Creating Postscript Forms - Oki 3037 User Manual

Creating PostScript Forms

PostScript forms are the ones to use if you are not
experienced with PCL Macro commands.
Creating & Downloading a PostScript Project
Remember that file names and paths are case sensitive.
Step 1: Create the Forms in Your Software Application
1. Create the document in your software application.
2. Click File
selected.
3. Select Print to
4. Engage the Encapsulated PostScript (EPS) output option.
Windows Me/98/95:
– Click
– Click the PostScript tab, then, if it is not already selected,
click Encapsulated PostScript
Windows NT 4.0:
– Click
– Scroll down to
PostScript Output Option
PostScript
5. Click OK.
6. Print the document to a file using the extension PRN.
Important!
Print and make sure the Oki PostScript driver is
file.
Properties (or your application's equivalent).
Properties (or your application's equivalent).
PostScript Options
(EPS).
ES 3037/3037e Software Utilities • 497
NOTE
(EPS).
and select
and click it, then click
Encapsulated