COLLATING
Collating can be carried out with or without a hard disk drive installed.
However, printers with a hard disk drive will provide greater
performance.
If your software application has a collate option, use it instead of
the collate option in the printer driver.
1. Open the file in your application and select
2. In the Print dialog box, select the appropriate driver, then click
Properties
3. On the
Job Options
copies required and—only if the application has no collate
option—select Collate.
PostScript Driver
4. Click
OK
Important
(or Setup, or your application's equivalent).
tab, under
C93_NT_PS_Collate.tif
and print the document.
ES 3037/3037e Windows NT 4.0 Operation • 379
Job
Type, enter the number of
PCL Driver
and
C93_NT_PCL_Collate.tif
File
Print.