Manual Feed; Selecting Number Of Copies; Collating Copies - Oki es7120 Reference Manual

4. Hold the grip of the paper tray and pull its extendable part to the front until it
reaches its maximum.
5. Squeeze the right width guide (1) and slide it to the paper width.
6. Load the paper with the side to be printed facing up. Curl up the back end of the
paper so that it will not fall from the tray.
7. Push the paper tray completely into the printer.
M
ANUAL FEED
Tray 1 can be used for manual feed. You must also set your Printer Properties for manual
feed. Tray 1 normally operates in multiple-purpose mode, where multiple sheets can be
loaded and printed continuously. In Manual mode, you are prompted to press the Start
button for each sheet.
S
ELECTING NUMBER OF COPIES
You can select the number of copies to print via your Printer Properties. When selecting the
number of copies, you should also decide if those copies are collated.
C
OLLATING COPIES
When printing multiple copies of a job, the output can be automatically collated. When
copies are collated, they are printed in groups by the print job, not by the page. If you do
not select the collate option, your copies will be printed by page. So, ten page number 1's
will print and then ten page number 2's will print. Collated jobs will print all pages in sets,
pages 1 through 10, until all sets have been printed.The default for Collating is On when
there is more than one copy being printed.
Advanced printing > 55