Si06-305
2.2
Removal of
Procedure
Step
1
The bellmouth is
attached to the front
plate with two screws
and four hooks.
Remove the two
2
screws and undo the
four hooks to release
the bellmouth.
Removal Procedure
Bellmouth
and
Warning Be sure to turn off all power supplies at least 10 min. before disassembling work.
Procedure
Left Side Plate
Outdoor Unit
Points
Remove the bellmouth from
the front plate after removing
the two screws which are set
below.
Slide the bellmouth in the
arrow direction to disengage
the hook B.
129