Air Flow Selection - Daikin FVKS25BVMB Service Manual

Si06-305
1.3

Air Flow Selection

When setting the

air flow selection

switch to .
Operating mode
Cool mode
Heat mode
When setting the
air outlet
selection switch
to .
Function and Control
Air conditioner automatically decides the appropriate blowing pattern depending on the
operating mode / situation.
When the room has become
fully cool, or when one hour has
passed since turning on the air
conditioner.
At start of operation or other
times when the room is not fully
cooled.
At times other than below.
(Normal time.)
At start or when air temperature
is low.
During Dry mode, so that cold air does not come into direct contact with people, air is blown
upper air outlet.
Regardless of the operating mode or situation, air blows from the upper air outlet.
Use this switch when you do not want air coming out of the lower air outlet. (While sleeping
etc..)
Situation
So that air does not come into direct contact
with people, air is blown upper air outlet,
room temperature is equalised.
So that air does not come into direct contact
with people. Air is blown upper air outlet.
Main Functions
Blowing pattern
Air is blown
from the upper
and lower air
outlets for high
speed cooling
during Cool
mode, and for
filling the room
with warm air
during Heat
mode.
17