Installing The Chassis - Nortel 8600 Quick Start Manual

Installing the chassis

This section gives instructions you can use when you install the chassis.
Unpacking
Step
1
2
3
4
If you find any damage, contact your Nortel sales representative.
Table 1
Chassis shipping accessories checklist
Check
Copyright © 2006 , Nortel Networks
.
Action
Remove the shipping container.
Place the chassis on antistatic material.
Check all items for damage.
Use the following chassis shipping accessories checklist to verify the
contents of the shipping container.
Accessory
Bracket kit containing: two
rack-mounting brackets and
Phillips-head screws
Screw package
Side cable-management bracket(s):
two brackets for the 8010 chassis and
one bracket for the 8006 and 8003
chassis
Rubber footpads
Nortel Ethernet Routing Switch 8600
NN46205-310 01.01 Standard
4.1 21 December 2006
—End—
Use To
Support the chassis in an equipment
rack
Mount the chassis in an equipment
rack
Manage network interface cables
Keep the chassis from slipping when
mounting it on a flat surface
Quick Start
13
Nortel Networks Confidential