Nortel 8600 Quick Start Manual page 42

42 Configuration
Prompt
Do you want to enable WEB
server service [n] (y/n)?
IP Address for mgmt port in first
CPU Slot [192.168.168.168/255
.255.255.0]:
IP Address for mgmt port in
second CPU Slot [192.168.168
.169/255.255.255.0]:
IP Address for mgmt-virtual-ip
[0.0.0.0/0.0.0.0]:
First net mgmt route
[0.0.0.0:0.0.0.0]:
Second net mgmt route
[0.0.0.0:0.0.0.0]:
Third net mgmt route
[0.0.0.0:0.0.0.0]:
Fourth net mgmt route
[0.0.0.0:0.0.0.0]:
IP address of the default VLAN
[0.0.0.0/0.0.0.0]:
Do you want to save the changes
[Saving the parameters will
update the files /flash/boot.cfg
and /flash/config.cfg] (y/n)?
Copyright © 2006 , Nortel Networks
.
Enter y if you want to enable WEB server service. Accept the
default (n), if you do not want to enable WEB server service.
Enter the IP address of the management port in the first CPU
slot.
Enter the IP address of the management port in the second
CPU slot.
Enter the IP address of the virtual management port. Accept
the default, 0.0.0.0/0.0.0.0, if you do not want to specify an
IP address.
Enter the IP address of the first network management route.
Enter the IP address of the second network management
route (static route from the network management port to a
device in the network). For security reasons, the system does
not accept a route to a network that conflicts with the main
nonmanagement routing table, and therefore does not accept a
default route of 0.0.0.0.
Enter the IP address of the third network management route
(static route from the network management port to a device in
the network).
Enter an IP address of the fourth network management route
(static route from the network management port to a device in
the network).
Enter the IP address of the default virtual LAN (VLAN).
Enter y to save the boot and runtime configuration files. Enter
n if you do not want to save your changes.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 01.01 Standard
4.1 21 December 2006
Action
Nortel Networks Confidential