Appendix D
Modem Upgrade Instructions
Disassembly Instructions
D-2
Remote Annex 6300 Hardware Installation Guide
These instructions assume that you are facing the unit's rear panel.
To disassemble the Remote Annex 6300 (see
1
Unplug the unit.
2
Disconnect all the cables.
3
Remove the screws from the side and back of the unit.
4
Slide the cover back and lift the cover vertically (see
Figure D-1. Removing the Remote Annex 6300 Cover
Figure
D-1):
Figure
D-1).
Screws
(17 places)