Appendix C
Modem Carrier Card Upgrade Instructions
Disassembly Instructions
C-2
Remote Annex 6300 Hardware Installation Guide
The following instructions describe how to disassemble the Remote
Annex 6300. These instructions assume that you are facing the unit's
rear panel. Figure C-1 illustrates the instructions.
1
Unplug the unit.
2
Disconnect all the cables.
3
Remove the screws from the side and back of the unit.
4
Slide the cover back and lift the cover vertically (see
Figure C-1. Removing the Remote Annex 6300 Cover
Figure
C-1).
Screws
(17 places)