Remote Annex 6300 Dumps
The Remote Annex 6300 dumps its memory image to a host running
load server software when certain software or hardware events occur.
Table 4-9
shows the LED states during a dump.
Dump files are generated for use by technical support
personnel only.
Events that trigger Remote Annex 6300 dumps are:
Non-recoverable hardware or software errors.
Software fails to reset the Remote Annex 6300's watchdog
timer.
Software fails one or more internal consistency checks.
Hardware detects an internal fault.
Table 4-9. Remote Annex 6300 LED States During a Dump
Activity
Dump
Key:
On continuously.
Flashing irregularly.
Remote Annex 6300 Hardware Installation Guide
Chapter 4
STAT
ATTN
Green
Amber
Troubleshooting Procedures
TRAF
Green
4-17