Ir Mode; Irc-6 Operation - Chauvet Intimidator Spot 355 IRC User Manual

IR Mode

IRC-6 Operation

Intimidator Spot 355 IRC User Manual Rev. 1
IR mode allows the product to be controlled with an infrared remote controller. The
IRC-6 can remotely set the product to various modes; adjust the color, speed and
sensitivity; and set the strobe.
To set the product to IR mode, do the following:
1. Make sure the product is plugged into a power source and not connected to a DMX
cable.
2. Press <MENU>.
3. Use <UP> or <DOWN> to choose Run Mode.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to choose IR.
6. Press <ENTER> and the IR indicator on the front of the Intimidator Spot 355Z IRC
lights up.
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
between the remote and the product.
Some of the buttons on the remote work differently than what is indicated on their
labels. For example:
·
<MANUAL> changes the Gobo pattern.
·
<FADE> changes the color.
·
<R>, <G>, <B>, <A> and <W> control other manual functions.
Please read the next section carefully.
The list below describes which features each button controls.
·
<BLACKOUT> - Turns LED on and off.
·
<AUTO> - Activates Auto mode. Use the <+> and <-> buttons to cycle through Auto
modes.
·
<SOUND> - Activates Sound mode.
·
<STROBE> - Activates the strobe. Use the <+> and <-> buttons to cycle through
strobe speeds.
·
<SPEED> - Adjusts the movement speed. Use the <+> and <-> buttons to cycle
through movement speeds.
·
<SENSITIVITY> - Adjusts sound sensitivity. Use the <+> and <-> buttons to cycle
through sound sensitivity levels.
·
<%> - Adjusts the brightness of the LEDs. Use the <+> and <-> buttons to increase
or decrease the brightness of the LEDs.
·
<MANUAL> - Changes the Gobo pattern. Use the <+> and <-> buttons to scroll
through the GOBO options.
·
<FADE> Changes the color. Use the <+> and <-> buttons to scroll through the color
options.
·
<R> - Activates color wheel rotation control. Use the <+> and <-> buttons to
increase or decrease rotation speed.
·
<G> - Activates Gobo wheel rotation control. Use the <+> and <-> buttons to
increase or decrease rotation speed.
·
<B> - Activates color and Gobo auto mode, independent from movement.
·
<A> - Activates pan and tilt control. Press <A> to toggle pan and tilt, and use the
<+> and <-> buttons to increase or decrease pan or tilt values.
·
<W> - Activates prism control. Use the <+> and <-> buttons to set prism value,
0–15 for off, 16–255 for on.
·
<+> - Increases values for controls as described above.
·
<-> - Decreases values for controls as described above.
·
<0>–<9> - Activates specific Auto modes. Can be used as a shortcut for the
combination of the <AUTO> button and the <+> and <-> buttons.
·
<UV> or <P> - Adjusts the focus.
Page 19 of 25