Mounting; Orientation; Rigging - Chauvet Intimidator Spot 355 IRC User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Intimidator Spot 355 IRC User Manual Rev. 1
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The Intimidator Spot 355 IRC may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight. See the
information. The CLP-15 clamp from Chauvet is appropriate for this product.
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Mounting Clamp
(works with CLP15 clamp from Chauvet)
Mounting Bracket
Bracket
Attachment Plate
x2
Rubber Feet for
Floor Mounting x4
When using only one mounting clamp with this fixture, you must use a clamp with
a captive bolt to prevent accidental loosening.
Technical Specifications
Safety Cable
(such as CH-05 from Chauvet)
Threaded Hole for
Safety Loop
(behind the foot)
for weight
Page 9 of 25