Controlled Configuration; Control Mode; Control Personalities; Starting Address - Chauvet onAir Panel 1 IP User Manual

Controlled Configuration

Use control configurations to operate the product with a DMX, Art-Net™, or sACN controller.

Control Mode

The onAir IP Panel 1 works with wired DMX, CRMX™, Art-Net™, and sACN control signals. To select
which protocol to use:
1. Go to the Protocol main level.
2. Select the desired protocol, from DMX512, ArtNet, or sACN.
• See the Wireless Lumenradio CRMX™ Settings
• See the

Ethernet Setting

Control Personalities

To set the control personality:
1. Go to the DMX Channel main level.
2. Select the desired personality, from 1Ch, 3Ch, 4Ch, 5Ch, 6Ch, 8Ch1, 8Ch2, 10Ch, 11Ch, 15Ch1,
15Ch2, 16Ch, XYBasic(6), or XYExtended(10).
• See the

Starting Address

• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address in DMX mode:
1. Go to the DMX Address main level.
2. Select the starting address (001–512).
Personality
15Ch1
XYBasic(6)
XYExtended(10)
Ethernet Setting
The Ethernet Settings control the universe, start address (Art-Net™ or sACN), IP address, and ethernet
conversion functions of the product.

Universe

To assign an Art-Net™ or sACN universe to the onAir IP Panel 1:
1. Go to the Ethernet Setting main level.
2. Select the Universe option.
3. Set the universe, from 000–255 (for Art-Net™) or from 001–256 (for sACN).

Start Channel

Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address in Art-Net™ or sACN mode:
1. Go to the Ethernet Setting main level.
2. Select the Start Channel option.
3. Select the starting address (001–512)
• See the Starting Address
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
16
section for further setup of ethernet protocols (Art-Net™ or sACN).
section for the highest starting address available for each personality.
Highest Address
1Ch
3Ch
4Ch
5Ch
6Ch
8Ch1
8Ch2
10Ch
11Ch
15Ch2
16Ch
section for the highest starting address available for each personality.
section for further setup of CRMX™.
Products per Universe
512 512
510 170
509 128
508 102
507 85
505 64
503 51
502 46
498 34
497 32
507 85
503 51
onAir IP Panel 1 User Manual Rev. 3
Operation