Normal Mode; Offset Mode - Chauvet Followspot 1200 Quick Start Manual

Normal
Mode
DMX Address
1) Go to MENU > Addr and press <ENTER>
2) Select a starting DMX address (001~512)
Control Activation
1) Go to Menu > b_co and press <ENTER>
2) Change the setting with <UP> or <DOWN>
3) Press <ENTER> to save the new value, or press <MENU> to exit
Self-test
1) Go to Menu > test
2) Press <ENTER> to start the tests
3) Press <ENTER> to suspend the test, or press <MENU> to exit
Fixture Hours
1) Go to Menu > Fhrs
2) Press <ENTER> to see the number of hours, or press <MENU> to exit
Lamp
1) Go to Menu > LAMP and press <ENTER>
2) Change the setting (On/Off) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
Reset
1) Go to Menu > rSet and press <ENTER>
2) After a few seconds, all DMX channels will return to their default settings.

Offset Mode

Entering Offset
1) Press <MENU> for five seconds.
Mode
Color Offset
1) Go to Menu > oCoL and press <ENTER>
2) Change the setting (-127~127) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
Effect Offset
1) Go to Menu > oCoL and press <ENTER>
2) Change the setting (-127~127) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
Dimmer Offset
1) Go to Menu > oCoL and press <ENTER>
2) Change the setting (-127~127) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
Exiting Offset
1) After you are done, wait eight seconds for the display timer to activate.
Mode
Followspot 1200 Quick Start Guide Rev. 3
All manuals and user guides at all-guides.com
The display will show the first offset mode function.
The display will show the current DMX address.
Operation
11