ABLE OF ONTENTS 1. Before You Begin ..........................3 What is included ............................3 Unpacking Instructions ..........................3 AC Power ..............................3 Contact Us ..............................3 Safety Instructions ............................ 4 NON-INTERLOCKED HOUSING WARNING ..................... 5 LASER SAFETY AND OPERATING INSTRUCTIONS ................5 LASER SAFETY LABEL REPRODUCTION ....................
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch. Contact Us Wor l d Wi de General Information CHAUVET 3000 North 29 Court Hollywood, FL 33020 voice: 954.929.1115...
Safety Instructions Please read these instructions carefully, which includes important information about the installation, usage and maintenance of this product. Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.
NON-INTERLOCKED HOUSING WARNING This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation. The laser power levels accessible, if the unit is opened, can cause instant blindness, skin burns and fires.
LASER EXPOSURE WARNING LASER LIGHT AVOID DIRECT EYE EXPOSURE Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1.
2. I NTRODUCTION Features Operating modes: automatic, sound activation, master/slave, manual Creates a unique star field effect with many patterns and hundreds of beams Pattern and speed knobs for automatic mode Built-in automatic programs via master/slave Built-in sound activated programs via master/slave Safety cover protects laser during transport Moveable bracket to allow different mounting positions Complies with FDA / CDRH standards for ClassIIIR...
ROPER SAGE This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effects are properly mounted using a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your lighting vendor. International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and the lowest laser light vertically.
3. S ETUP Mounting O RI ENT AT I O N This fixture may be mounted in any safe position, provided there is adequate room for ventilation. RI G G I NG Hanging Clamp It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C”...
4. O PERATING NSTRUCTIONS Navigating the Control Panel Access control panel functions using the four panel buttons located directly underneath the LCD Display. Button Function Used to access the menu or to return to a <MODE> previous menu option Scrolls through menu options in ascending <UP>...
No laser output Bounce mirror motor may have shifted during shipping, readjust If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location on the next page. Scorpion™ Storm MG User Manual...
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call CHAUVET and request RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.