Using The Tui Commands; Using The Chairperson Tui Commands; Using The Participant Tui Commands - Nortel Integrated Conference Bridge User Manual

5. To release chairperson control, enter *52. Only the chairperson uses
this command.
When activated, the person releasing chairperson control becomes a
regular conference participant, allowing someone else to acquire
chairperson control.

Using the TUI commands

All commands in the TUI are entered using the telephone keypad. They
are listed in "TUI command summary" on page 78.

Using the chairperson TUI commands

The chairperson can use the commands in "Chairperson commands" on
page 78 to manage a conference. The chairperson can use the
commands for all participants on either card if the ICB is dual-card.
Steps
1. Dial in to the conference as chairperson.
2. At the prompt, enter the conference ID.
3. At the prompt, enter the conference password, if configured.
4. Enter the TUI commands listed in Tables 3 to 5 on
required.

Using the participant TUI commands

Participants can use only those commands listed in Table 6 on page 81
while a call is in progress.
Steps
1. Dial in to the conference as a regular participant.
2. At the prompt, enter the conference ID.
3. At the prompt, enter the conference password, if configured.
4. Enter the TUI commands listed in Table 6 on page 81, as required.
Telephone User Interface
pages 78 to 80 as
75