Adding The Icb Form As The Default Calendar Form - Nortel Integrated Conference Bridge User Manual

Microsoft Outlook User Interface
g. Close the Calendar window. Do not save the appointment.
4. Publish the ICB form file icbf.oft.
a. Go to the folder where the ICB files are located.
b. Double-click icbf.oft.
Note: Click No if asked to Enable macros.
The Calendar window opens.
c. Choose Tools > Forms > Publish Form As.
The Publish Form As window opens. See Figure 24 on
page 51.
d. Select Personal Forms Library in the Look In field.
e. Enter a Display name and Form name, such as icbf.
f. Click Publish.
Note: Click Yes if asked to replace an existing form.
g. Close the Calendar window. Do not save the appointment.

Adding the ICB form as the default Calendar form

The ICB files must be published in Microsoft Outlook before the user can
configure the ICB form as the default Calendar form in Microsoft Outlook.
Follow the steps below to configure the ICB form as the default Calendar
form in Microsoft Outlook.
Steps
Note: Before beginning this procedure, obtain the name of the
published ICB form file icbf.oft.
1. Open Microsoft Outlook.
2. Right-click Calendar in the Folder List.
3. Choose Properties.
The Calendar Properties window opens.
4. Select the General tab.
5. Select Forms in When posting to this folder, use.
52