To Install The Server; Installing The Server - Nortel CallPilot 1002rp Hardware Installation Manual

Installing the server and connecting the peripheral devices

Installing the server

Introduction
Before you install the 1002rp server, ensure that the chosen location meets
the requirements identified on the "Site inspection checklist" provided in the
Installation and Configuration Task List (555-7101-210).

To install the server

Place the 1002rp server in its chosen location. If you are installing the server
in a rack cabinet, follow the instructions that are provided with the slide
rails.
Connect peripheral devices as described in the remainder of this chapter.
.
60
WARNING
Do not connect the server to the power yet.
Standard 1.07
CallPilot