Basic Operations for Function Setup
The following procedure is an example of setting up the function(s). To set the desired function, refer to
the list of Function Parameters described later.
1
Press the Function key.
2
Select the desired setting.
3
Select the desired tab.
4
Select an item.
If a single tab has six or more items, a block
number is displayed as "01/02".
Select
or
the screen.
When setting the Key Operator Mode, enter
the identification code (4-digit), and then
select "OK".
8
to scroll items up or down on
5
Change the settings by the following
operations.
Selecting an item
Select a desired item, and then select "OK".
Ex: When setting "01 Density(HOME)" in Fax/
Email Settings (see page 32).
Entering the number
Select "Input" and enter the number, and then
select "OK".
Ex: When setting "14 Power Save Mode
Timer" in General Settings (see page 11).