Face Detection - American Dynamics illustra 600 Installation & Operation Manual

4.5.3 Face Detection

The camera comes with face detection capability. With face detection function enabled, when the camera
detects faces within a pre-designated area, the camera will generate an alarm and then take an action
that you specify.
Basic Settings
To use the face detection function, click and drag your mouse on the image to define the region of
interest. Then click Save Window to save the settings.
 Face Detection: Allows to enable/disable the face detection function. This operation will cause
the web page to take a while to reload the settings, due to the camera takes around 25 seconds
to restart.
 Detection Box: If turning on this function, a box will appear over each of the faces detected.
 Direction: Select the orientation of faces in the video stream. UP means the top of the face is
generally in the up direction. The orientation may need to be adjusted when the camera is
installed on its side or at an angle.
 Threshold: Select a face detection acceptance tolerance.
 Minsize: Select a minimum scanning window for faces.
4. Using illustra Utility
55