4. Using illustra Utility
SMTP Server Requires Authorization: If your SMTP server requires authorization to send e-
mail, enable this option.
SMTP Server IP Address: Enter the IP address of your SMTP server.
User Name: Enter the user name to log in to the SMTP server.
Password: Enter the password to log in to the SMTP server.
Sender: Enter the e-mail address to be shown as the sender of the notification e-mail.
Receiver: Enter the e-mail address to which the notification e-mail is sent.
4.3.4 NTP
If you want your camera to synchronize its time clock with a Network Time Protocol (NTP) server,
configure the NTP server settings here.
NTP Server IP Address: Enter the IP address or domain name of the NTP server you want to
use.
Time Zone: Select a time zone in which the camera is located.
DST (Daylight Saving Time) Saving: Check this check box if you use the camera in an area that
40
Installation & Operation Guide