American Dynamics illustra 600 Installation & Operation Manual page 12

1. Product Overview
 AC Power: Connects to DC 12V / AC 24V power supply. If you are to use power from Ethernet
connection, this connector is not used when the power is provided by PoE.
 IP Network Connector: Connects to the LAN port of a standard 10Base/100Base-TX device,
e.g., hub, switch or router.
 Audio In: Connects to an external microphone.
 Audio Out: Connects to speaker.
 Alarm In 1 & 2: Connects to devices that trigger alarm signals. Up to two input devices can be
connected.
 Alarm Out: Connects to device that responds to alarm signals, such as buzzers or lights.
 GND: Ground (electricity) in electrical circuits.
Note
To connect the Audio In/Out, Alarm In/Out or GND wires, press the relevant spring terminal tab
inward using an appropriate small tool and insert the wire into the opening. Then release the tab to
secure the wire.
4
Spring terminal tab
Installation & Operation Guide