Ftp; Smtp - American Dynamics illustra 600 Installation & Operation Manual

1. Don't use the port numbers which have been used by the camera, including 8080, 25001 and
38782. Also, avoid using RTSP port numbers 7777~7781 which have been reserved for RTSP
services.
2. Don't use the port numbers which have been used by other services on your network. Contact
your network administrator on which port numbers have been used.
3. If you choose to use a non-standard port, and your camera on the LAN is to be accessible
from the Internet, then you must configure your router/firewall to forward incoming HTTP request
to that specified port (via NAPT/port forwarding settings).
 MAC: Display the MAC address of the camera. Each camera comes with a unique MAC address,
which is indicated on the product label. It helps you to identify which camera is currently accessed,
particularly when multiple cameras are connected on your network.

4.3.2 FTP

To allow the camera to upload recorded video clips to an FTP server, you have to specify an FTP server
and configure the related settings.
 FTP Server: Enter the IP address of your FTP server.
 FTP Server Port: Enter the FTP port number. 20 and 21 are standard FTP port numbers but you
may also choose a non-standard port number between 1024 and 65535.
Notes
1. Don't use the port numbers which have been used by the camera, including 8080, 25001 and
38782. Also, avoid using RTSP port numbers (default 7777~7781 unless otherwise specified.)
2. Don't use the port numbers which have been used by other services on your network. Contact
your network administrator on which port numbers have been used.
 User Name: Enter the user name to log in to the FTP server.
 Password: Enter the password to log in to the FTP server.
 File Upload Path: Specify the folder path where you'd like to upload files to.

4.3.3 SMTP

To allow the camera to send you email notification when an event is triggered, you need to specify an
SMTP server to send the e-mail.
4. Using illustra Utility
39