American Dynamics illustra 600 Installation & Operation Manual page 60

4. Using illustra Utility
The camera will send a notification e-mail attached with the recorded JPEG files
to a specified SMTP server.
SMTP
If the SMTP server is not available, the camera will automatically save the
recorded files to the SD card (if there is one) and write the event to the log.
The camera will record AVI/JPEG files to the SD card when the alarm is
triggered.
SD Card
We do not recommend that the SD card be used as the primary medium for
continuous recording due to the finite lifetime of Flash memory.
Notes:
1. For the actions regarding recording, scheduled recording takes top priority, Ethernet triggered
recording takes second, then other event triggered recording.
2. Only one event will be handled at a time. If an event is already triggered, other event will be
logged to the system but no action will be taken.
The Event defaults are listed in the table below:
Motion Detection
External Alarms
Face Detection
Blur Detection
Audio Detection
52
Sensitivity
Motion Area Window
Customized Threshold [1~100]
Action
External Alarm Input 1
External Alarm Input 2
External Alarm Output
Action: External Alarm Input 1
Action: External Alarm Input 2
Face Detection
Detection Box
Direction
Threshold
Minsize
Priority
Action
Sensitivity
Customized Threshold [1~100]
Action
Sensitivity
Customized Threshold [1~100]
Action
Off
No Mask
50
Alarms Only
Disabled
Disabled
Disabled, Active state: Normal Close
Alarms Only
Alarms Only
Disabled
Off
Up
4
25
Higher
Alarms Only
Off
50
Off
Off
50
Alarms Only
Installation & Operation Guide