displayed:
If MJPEG is selected for both primary and secondary streaming, live view will use the one with
lower resolution.
Changing codec, resolution and specific settings (e.g, H264 profile) will cause the web page to
reload the codec settings, the camera should take around 25 seconds to restart.
For those functions that require effective areas setup, users must enable at least one stream in
MJPEG.
Each codec comes with different parameters as described below:
H.264 Codec Settings
Resolution: Choose a video resolution as required. Note that changing resolution will cause the
codec to restart.
i600 series codec and resolution combination:
Primary Stream
Codec
H264
MJPEG
* 720p cannot be simultaneously used by primary and secondary streams.
i610 series codec and resolution combination:
Primary Stream
Codec
H264
MJPEG
* 1080p cannot be
Frame Rate: Choose the intended frame rate, i.e., the video frame to transmit per second. The
higher the frame rate, the higher the quality of the video.
Profile: The H.264 standard defines various sets of capabilities, which are referred to as profiles,
Resolution
720P*
4CIF
2CIF
CIF
Resolution
1080P*
4CIF
2CIF
CIF
used by primary and secondary streams.
simultaneously
Secondary Stream
Codec
Resolution
H264
MJPEG
Secondary Stream
Codec
Resolution
H264
1080P*
MJPEG
4. Using illustra Utility
4CIF
2CIF
CIF
720P*
4CIF
2CIF
CIF
4CIF
2CIF
CIF
4CIF
2CIF
CIF
27