•
Operating parameters
There are thirteen parameters configured in the system that are downloaded
to the DAC. They are:
•
•
•
•
•
•
•
•
Copyright © 2003-2008, Nortel Networks
.
— 60 minutes
DDN: 1 to 7 digits (0–9)
Dialogue parity
— Space (OFF)
— Mark (ON)
— Even
— Odd
DTR control
— Dynamic (affected by call progress)
— Forced ON
DCD control
— Dynamic (affected by call progress)
— Forced ON
Dialing mode
— Manual (user initiates the call with dialogue commands)
— Hotline (call the Autodial number upon connection)
Wire test
— Disabled (can be invoked only with front panel switch)
— Enabled (start only if the DAC firmware is idle)
Language
— English
— Quebec French
Keyboard dialing
— Enabled (allow both keyboard or Hayes dialing modes)
— Disabled (Hayes dialing only)
Make port busy
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Specifications 473