Architecture - Nortel Circuit Card 311 Reference

•
•
•
•
Applicability to France
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are:
•
•
•
•
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are as follows:
•
•
•
•
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are:
•
•
•
•

Architecture

The main functional blocks of the NTAK10 card architecture include:
•
•
•
•
Copyright © 2003-2008, Nortel Networks
.
per-channel and all-channel loopback capabilities for near-end and
far-end
self-test
download of incoming ABCD validation times from software
warm SYSLOAD (TS16 AS16 transmitted)
transmission and reception of alarm indication signaling (AIS) in TS16
such as card disabled and warm SYSLOAD
France-specific PPM counting
decadic dialing
France-specific alarm report and error handling
transmission and reception of alarm indication signaling (AIS) in TS16
(card disabled, warm SYSLOAD, etc.)
France-specific PPM counting
decadic dialing
France-specific alarm report and error handling
transmission and reception of alarm indication signaling (AIS) in TS16
such as card disabled and warm SYSLOAD
France-specific PPM counting
decadic dialing
France-specific alarm report and error handling
DS-30X interface
signaling interface
three microprocessors
digital pad
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Architecture 885