Nortel Circuit Card 311 Reference page 184

184 NT5D11 and NT5D14 Lineside T1 Interface cards
•
•
Card LAN interface
Maintenance data is exchanged with the CPU over a dedicated
asynchronous serial network called the Card LAN link.
Maintenance data is exchanged with the Common Equipment CPU over a
dedicated asynchronous serial network called the Card LAN link. The Card
LAN link is described in
Maintenance data is exchanged with the CPU over a dedicated
asynchronous serial network called the Card LAN link.
Sanity timer
The Lineside T1 card also contains a sanity timer that resets the
microcontroller in the event of a loss of program control. The microcontroller
must service the sanity timer every 1.2 seconds. If the timer is not properly
serviced, it times out and causes the microcontroller to be hardware reset.
The Lineside T1 card also contains a sanity timer that resets the
microcontroller in the event of a loss of program control. If the timer is
not properly serviced by the microcontroller, it times out and causes the
microcontroller to be hardware reset. If the microcontroller loses control and
fails to service the sanity timer at least once per second, the sanity timer
automatically resets the microcontroller, restoring program control.
The Lineside T1 card also contains a sanity timer that resets the
microcontroller in the event of a loss of program control. The microcontroller
must service the sanity timer every 1.2 seconds. If the timer is not properly
serviced, it times out and causes the microcontroller to be hardware reset.
Copyright © 2003-2008, Nortel Networks
.
— programming of loop interface control circuits for administration of
channel operation
— maintenance diagnostics
interface with the line card circuit:
— converts on/off-hook, and ringer control messages from the DS-30X
loop into A/B bit manipulations for each time slot in the T1 data
stream, using robbed bit signaling.
the front panel LED when the card is enabled or disabled by instructions
from the NT8D01 controller card.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
"Card LAN link" (page 25).