Printing A Configuration Page; Interpreting The Configuration Page - Pitney Bowes DP50S Operating Instructions Manual

Printing a Configuration Page

Follow the procedure below to print the configuration page.
• The configuration page is printed on A4 or Letter (8
same paper tray.
1. Press the [Menu] key.
The menu screen appears.
2. Press the [ ] or [ ] key to display [List/Test Print], and then press the [OK] key.
3. Press the [ ] or [ ] key to display [Config. Page], and then press the [OK] key.
After the configuration page is printed out, the screen returns to List/Test print menu.
4. Press the [Menu] key.
The initial screen appears.

Interpreting the Configuration Page

System Reference Unit
Number
Shows the serial number assigned to the board by its manufacturer.
Total Counter
Shows the total number of pages printed by the printer to date.
Firmware Version
• Printer
Shows the version number of the printer controller firmware.
• Engine
"×11") size paper, so load them in the
/
1
2
BMW028S
List/Test Print Menu
3
95