User Code - Pitney Bowes DP50S Operating Instructions Manual

5. Mac OS Configuration
• "Stored Print"
Deleting a Stored Print File
1. Press [Prt.Jobs].
A list of print files stored in the printer appears.
2. Select [Stored Print Jobs], and then press [Job List].
A list of Stored Print files stored in the printer appears.
3. Select the file you want to delete by pressing it.
4. Press [Delete].
A confirmation screen appears.
5. Enter the password using the scroll keys, and then press [OK].
A confirmation screen appears.
A confirmation screen will appear if the password is not entered correctly. Press [OK] to enter
the password again.
6. Press [Delete].
After the file is deleted, the printer screen reappears.
• Press [Cancel] to cancel the delete request.
5
• If you have already set a password in the printer driver, enter it to delete.

User Code

Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users and allows you to
check the number of sheets printed under each code with SmartDeviceMonitor for Admin. The follow-
ing table shows the tabs or menus where you can select this function.
Mac OS
Mac OS X
198
Select the [Enable User Code] check box, and
thenenter a user code in the [User Code] box on
[Job
Log] in the print dialog box.
Select the [Enable User Code] check box, and
thenenter a user code in the [User Code] box on
[Job
Log] in the print dialog box.