Devicename; Dhcp - Pitney Bowes DP50S Operating Instructions Manual

msh> btconfig
Mode settings
You can set the Bluetooth operation mode to {private} or {public}.
msh> btconfig {private|public}
• The default is {public}.

devicename

Use the "devicename" command to display and change the printer name.
View settings
msh> devicename
Printer name configuration
msh> devicename name "string"
• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.
Printer name initialization
msh> device name clearname
Reset the printer name to its default.

dhcp

Use the "dhcp" command to configure DHCP set-
tings.
View settings
The following command displays the current DHCP settings.
msh> dhcp
Configuration
You can configure DHCP.
msh> dhcp "interface_name" {on|off}
• Click {on} to enable DHCP. Click {off} to disable DHCP.
• If the DNS server address and domain name are obtained from DHCP, be sure to click {on}.
• wlan can be specified only when the wireless LAN interface unit is installed.
ether
Interface name
Remote Maintenance by telnet
Interface configured
Ethernet interface
4
143