Status; Syslog - Pitney Bowes DP50S Operating Instructions Manual

SSH/SFTP communication timeout setting
msh> ssh timeout {0-65535}
The default is 300.
SSH/SFTP communication login timeout setting
msh> ssh logintimeout {0-65535}
The default is 300.
Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|1024} "character string"
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
Deleting open key for ssh/sftp communication
msh> ssh delkey
• If you do not specify a character string, current setting is displayed.

status

Use the "status" command to display the printer status.
Messages
msh> status
• For details, see "Getting Printer Information over the Network".

syslog

Use the "syslog" command to display the information stored in the printer's system log.
View message
msh> syslog
• For details about the information displayed, see "Message List".
Remote Maintenance by telnet
4
165