Message List - Pitney Bowes DP50S Operating Instructions Manual

4. Monitoring and Configuring the Printer

Message List

This is a list of messages that appear in the printer's system log. The system log can be viewed
using the "syslog" command.
System Log Information
Use the following command to display the system log information:
• UNIX: Use the "syslog" command and "rsh", "rcp", "ftp", and "sftp" parameters.
• telnet: Use the "syslog" command.
Access to NetWare server <file server
name>denied. Either there is no account for this
print serveron the NetWare server on the pass-
4
word wasincorrect.
account is unavailable: encryption is impossible.
account is unavailable: same account name
beused.
account is unavailable: The authenticationpass-
word is not set up.
add_sess_IPv4: bad trap addr:<IPv4
address>,community:<community name>
add_sess_IPv4: community<community
name>already defined.
add_sess_IPv6: bad trap addr:<IPv6
address>,community:<community name>
176
Message Problem and solutions
(In the print server mode) Login to the file server-
failed. Make sure that the print server is regis-
teredon the file server. If a password is specified
for theprint server, delete it.
Encryption is not possible and account is dis-
abled.
This could be because:
• Security option is not installed.
• Encryption password has not been specified.
User account is disabled. This could be because
ituses the same account name as the administra-
toraccount.
User account is disabled. This could be because
theauthentication password is not set, and only
theencryption account is set.
The IPv4 address (0.0.0.0.) is unavailable when
thecommunity access type is TRAP. Specify the
host
IPv4 address for the TRAP destination.
The same community name already exists. Use-
another community name.
The IPv6 address [::] is unavailable when the-
community access type is TRAP. Specify the host
IPv6 address for the TRAP destination.