Configuring The Basic Settings On The Jsa3800 Appliance - Juniper 3800 Hardware Manual

Juniper Secure Analytics 3800 Hardware Guide

Configuring the Basic Settings on the JSA3800 Appliance

42
To configure the basic setting using the JSA interface:
NOTE: When using a laptop to connect to the appliance, you must use a
terminal program, such as HyperTerminal, to connect to the appliance.
At the console prompt, log in as
1.
when you log in for the first time.
NOTE: The username is case sensitive.
Press Enter. The End User License Agreement (EULA) appears.
2.
Read the information and press the Spacebar to advance each window until you have
3.
reached the end of the agreement.
Type YES to accept the agreement, then press
4.
window appears.
NOTE: Although your current position is not highlighted, use the up or
down arrow keys and Spacebar to select an option. Use the left or right
arrow keys to select
Select the appliance ID and then press Enter to select
5.
Select normal from the following types of setup:
6.
normal—Default setup
recovery—HA recovery setup
Select Next . The Tuning Template window appears.
7.
Select and then select
8. Enterprise
Select the method you want to use to set the date and time:
9.
Manual–Allows you to manually input the date and time. Select
Server–Allows you to specify your time server. Select
Select your time zone continent or area, and then select
10.
Select your time zone region, and then select
11.
window are regions associated with the continent or area previously selected.
Select one of the following Internet protocols, IPv6 or IPv4.
12.
Select . The Management Interface window appears.
13. Next
(default username). No password is required
root
. The Appliance ID selection
Enter
.
Next
Next
. The Date and Time window appears.
Next
Next
Next
. The options appearing in this
Next
Copyright © 2015, Juniper Networks, Inc.
.
Next .
.
.