Connecting The Jsa3800 Appliance To External Devices; Connecting The Jsa3800 Appliance To A Management Device; Figure 16: Connecting The Management Device - Juniper 3800 Hardware Manual

CHAPTER 9
Connecting the JSA3800 Appliance to
External Devices

Connecting the JSA3800 Appliance to a Management Device

Copyright © 2015, Juniper Networks, Inc.
Connecting the JSA3800 Appliance to a Management Device on page 35
You can control the JSA3800 appliance through a connected management device (such
as a laptop). Use the console port to connect your laptop as shown in

Figure 16: Connecting the Management Device

For the location of the ports, refer to the JSA3800 Back Panel Components table in
"JSA3800 Appliance Back Panel Description" on page
NOTE: You can choose any GB ports as the management port.
To connect a management device with the JSA3800 appliance:
Connect external devices using the ports on the back panel of the appliance.
1.
If you use a laptop, connect the laptop to the DB-9 serial console port on the back
2.
panel.
Figure 16 on page
9.
35.
35