Table of Contents
Advertisement
Juniper Secure Analytics 3800 Hardware Guide
Related
Documentation
36
Plug an Ethernet cable into the network port on the back panel.
3.
Plug a RS-232 (DB-9 F/F) cable into the console port.
4.
NOTE:
When using a laptop to connect to the appliance, you must use a
terminal program, such as HyperTerminal, to connect to the appliance.
Select the appropriate COM port to use.
5.
Configure the following port settings:
6.
Bits per second =
9600
Stop bits =
1
Data bits =
8
Parity =
None
Grounding the JSA3800 Appliance on page 33
Connecting the JSA3800 Appliance to a DC Power Source on page 37
Installing the JSA3800 Appliance on page 25
Copyright © 2015, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
