Accessing The Jsa Interface - Juniper 3800 Hardware Manual

Related
Documentation

Accessing the JSA Interface

Purpose
Action
Copyright © 2015, Juniper Networks, Inc.
Select the interface you want to specify as the management interface and select
14.
.
Next
To configure the JSA network settings, enter the values for the following parameters.
15.
Use the up or down arrow keys to navigate the fields:
Hostname—Type a fully qualified domain name (FQDN) as the system hostname.
IP Address—Specify the IP address of the system.
Netmask—Specify the network mask address for the system.
Gateway—Specify the default gateway for the system.
Primary DNS—Specify the primary DNS server.
Secondary DNS—(Optional) Specify the secondary DNS server.
Public IP—(Optional) Specify the public IP address of the server. The server uses
this IP address to communicate with another server that belongs to a different
network using Network Address Translation (NAT). NAT translates an IP address
in one network to a different IP address in another network.
Email Server—Specify the e-mail server. If you do not have an e-mail server, specify
the local host in this field.
Use Tab to select . Press Enter. The New Root Password window appears.
16. Next
To configure the JSA root password:
17.
a. Type a new password.
b. Select Next and then press Enter. The Confirm New Root Password window
appears.
c. Reenter your new password to confirm, and select
A series of messages appears as JSA continues with the installation; this process
takes from three to five minutes. When the JSA installation process is complete,
the message window appears.
Press Enter and select
18.
You are now ready to access JSA. For more information, see
Interface" on page 43.
Type exit and press Enter.
19.
Accessing the JSA Interface on page 43
JSA3800 Appliance Physical Specifications on page 15
Connecting the JSA3800 Appliance to a Management Device on page 35
To access a Juniper Secure Analytics (JSA) interface:
Open your Web browser.
1.
Chapter 11: Performing the Initial Configuration
to complete the installation.
OK
.
Finish
"Accessing the JSA
43