Planning And Preparing The Site; General Site Installation Guidelines For The Jsa3800 Appliance; Jsa3800 Appliance Physical Specifications - Juniper 3800 Hardware Manual

Secure analytics

Table of Contents

CHAPTER 4

Planning and Preparing the Site

The following precautions can help you plan an acceptable operating environment for

your JSA3800 appliance and avoid environmentally caused equipment failures:

For the cooling system to function properly, the airflow around the chassis must be

unrestricted. Allow sufficient clearance between the front and back of the chassis and

adjacent equipment. Ensure that there is adequate circulation in the installation location.

Follow the electrostatic discharge (ESD) procedures to avoid damaging the equipment.

Static discharge can cause components to fail, either completely or intermittently over

time.

NOTE:

Install the appliance only in restricted areas, such as dedicated

equipment rooms and equipment closets, in accordance with Articles 110-16,

110-17, and 110-18 of the National Electrical Code, ANSI/NFPA 70.

Additional Hardware Requirements on page 17

Table 7 on page 16

lists the specifications for the JSA3800 appliance.

Table of Contents