Installing The Jsa3800 Appliance; Figure 5: Connecting The Ac Power Cord - Juniper 3800 Hardware Manual

CHAPTER 7

Installing the JSA3800 Appliance

Installing the JSA3800 Appliance

Copyright © 2015, Juniper Networks, Inc.
Installing the JSA3800 Appliance on page 25
Installing the JSA3800 Appliance Using Front-and-Rear-Mounting Flush in a Four-Post
Rack on page 27
Mid-Mounting the JSA3800 Appliance in a Two-Post Rack on page 29
Place the shipping container on a flat surface and carefully remove the hardware
components.
To install the JSA3800 appliance:
Mount the JSA3800 appliance in your server rack using the attached mounting
1.
brackets. See "Installing the JSA3800 Appliance Using Front-and-Rear-Mounting
Flush in a Four-Post Rack" on page 27
a Two-Post Rack" on page
Plug the power cord into the AC receptacles on the rear panel as shown in
2.
Figure 5 on page 25.

Figure 5: Connecting the AC Power Cord

NOTE: To connect DC power, see
to a DC Power Source" on page
Plug the other end of the power cord into a wall socket.
3.
Plug the Ethernet cable into the Ethernet port on the back panel.
4.
and "Mid-Mounting the JSA3800 Appliance in
29.
"Connecting the JSA3800 Appliance
37.
25