Table of Contents
Advertisement
NOTE
Connect Terminal
Power Pack
CAUTION
NOTE
The Omni 3200
/3210
SE
VeriFone external printers. Contact your VeriFone representative or visit the
online store at
www.store.verifone.com
External printer connections are through the same port as check readers (see
Figure
11).
To connect a Printer 250, a custom interface cable is required. VeriFone publishes
the specifications for this cable in the Omni 3200
(VPN - 22878).
When finished connecting optional peripheral(s), connect the Omni 3200
3210
terminal to a power source.
SE
Using an incorrectly rated power supply can damage the terminal or cause it not
to work as specified. Before connecting, ensure that the power supply being used
to power the terminal matches the requirements specified at the back of the
terminal. (see
Chapter
Obtain the appropriately rated power supply before continuing.
1
Insert the round barrel connector (see
identified by the icon at right.
The round barrel connector on the power pack cable has a plastic lock tab that
secures the power cable to the terminal.
a
To lock the connector into the power port, align the plastic lock tab so it
points up. Insert the connector and twist to the left.
b
To unlock the connector, twist it to the right.
2
Plug the power pack cable into a wall outlet or surge protector.
Figure 12
Omni 3200
terminal supports the P250, P350,P900, and P950
SE
for information on these devices.
3, Specifications, for detailed power supply specifications).
Figure
/3210
Power Pack Connection
SE
SE
T
Connect Terminal Power Pack
/3210
Reference Manual
SE
SE
12) into the power port,
I
NSTALLATION
S
ERMINAL
ETUP
/
SE
19
G
UIDE
Advertisement
Table of Contents
