Plug in the power
Before using the power supply, please connect all peripherals
to the terminal. Failure to do so may result in damage to the unit
or connected devices.
Connect the power cord to the power supply via the three-prong
end and receiver.
Find the power input on the side of the terminal base.
Connect the single-pole AC adapter plug to the power input.
Turn the plug so that cord is directed toward the back of
the terminal.
The power supply should be the last item connected to the unit.
Plug the adapter into a surge protector (strongly recommended)
or a standard 120V electrical outlet.
Power Pack: Input: 100 - 240 V AC, 50/60Hz
Output: 9 V DC, 4 A
8