Hapter; Terminal Setup; Select Terminal Location; Ease Of Use - VeriFone Omni 3200SE Installation Manual

Terminal Setup

Select Terminal
Location

Ease of Use

NOTE
Environmental
Factors
CAUTION
This chapter describes the terminal setup procedure. You will learn how to:
•
Select a location and protect the terminal from adverse
Factors. See Select Terminal
•
Unpack the shipping carton. See
•
Examine terminal features. See
•
Establish telephone line connections. See
Connections.
•
Install paper roll in the printer. See
•
Configure optional peripheral devices. See
•
Establish power connections. See
•
Conduct credit/debit transactions. See
Use the following guidelines to select a location for the Omni 3200
terminal.
•
Select a location convenient for both merchant and cardholder.
•
Select a flat support surface, such as a countertop or table.
•
Select a location near a power outlet and a telephone/modem line connection.
For safety, do not string the power cable in a walkway or place across a
walkway on the floor.
When using the Omni 3200
make sure there is enough space on the countertop or table so that the terminal
can rotate freely.
•
Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
•
Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or a motor.
•
Do not use the terminal outdoors.
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust can void any warranty.
Location.
Unpack the Shipping
Examine Terminal
Establish Telephone Line
Install Paper
Connect Optional
Connect Terminal Power
Use Magnetic Card
/3210 terminal with the optional swivel stand,
SE SE
C

HAPTER

Environmental
Carton.
Features.
Roll.
Device(s).
Pack.
Reader.
/3210
SE SE
I G
NSTALLATION
2
9
UIDE